Benefit from our many years of experience in calibrating testing systems at Germany's biggest testing laboratory.
Our calibration service and laboratory have been accredited by the German Calibration Service (DKD( since 1994 and DAkkS-accredited since 2013. This shows that we clearly satisfy the requirements for testing and calibration laboratories as defined by DIN EN ISO/IEC 17025—your guarantee for accurate, independent, and efficient calibration services.
We are experts in many calibration methods, covering numerous standards. Our comprehensive materials testing machines and instruments calibration portfolio enables us to calibrate a wide variety of measurands. This includes accredited measurands such as force, length, mechanical work and hardness, plus many additional measurands so that we have the right solutions readily available for your machines and requirements.
Static or dynamic materials testing machines, pendulum impact tests, hardness testers or other testing machines—we can provide professional, traceable calibration for all. In addition to our own Zwick materials testing machines and instruments, we can also calibrate testing machines made by other manufacturers.
|Force Calibration of force measuring devices for materials testing machines to DIN 51220||
In the tensile direction: from 0.02 N to 3,000 kN
In the compression direction: from 0.02 N to 5,000 kN
|DIN EN ISO 7500-1 DIN EN ISO 7500-1 Bbl. 1-3 DIN EN ISO 7500-2 ASTM E4|
|Length Calibration of length measurement devices of materials testing machines as per DIN 51220||
In the tensile and compression directions: from 0 mm to 1,500 mm
|DIN EN ISO 9513 ASTM E83 ASTM E2309|
|Mechanical work Calibrating pendulum impact testers and impact testers||From 0.2 J to 750 J||DIN 51222 DIN 51230 DIN 52189 DIN 53512 DIN EN ISO 148-2 DIN EN ISO 13802 ASTM E23|
|Hardness Calibration of hardness testers to Brinell, Vickers, Rockwell, Knoop, and ball indentation methods||DIN EN ISO 6506-2 DIN EN ISO 6507-2 DIN EN ISO 6508-2 DIN EN ISO 4545-2 DIN EN ISO 2039-1 ASTM F36|
|Hardness Calibration of loading devices of hardness testing machines||from 10 g to 3,000 kg||DIN EN ISO 6506-2 DIN EN ISO 6507-2 DIN EN ISO 6508-2 DIN EN ISO 4545-2 DIN EN ISO 2039-1 ASTM F36|
|Hardness Calibration of the optical indentation measurement device of hardness testing machines||from 0 mm to 6 mm||DIN EN ISO 6506-2 DIN EN ISO 6507-2 DIN EN ISO 4545-2|
|Hardness Calibration of the depth measurement device of hardness testing machines||From 0 mm to 0.8 mm||DIN EN ISO 6508-2 DIN EN ISO 2039-1 ASTM F36|
|Dynamic force Verification of dynamic force on Vibrophores||MIL STD - 1312 B|
|Torque Calibration of torque||From 0.02 Nm to 2,000 Nm||According to DIN EN ISO 7500-1|
|Angle Calibration of encoder on torsion machine||from 0° to 360°||According to DIN EN ISO 9513|
|Alignment Electronic measurement of the test axis alignment on materials testing machines with strain-gaged alignment specimens||ASTM E 1012 Nadcap AC 7101 Nadcap AC 7122|
|Instrumented striking edges Calibration of the force of instrumented striking edges of pendulum impact testers||EN ISO 14556|
|Puncture and impact strength Calibration of impact testers||Mass of drop weight, drop height and Piezo load cell||DIN EN ISO 6603-1 DIN EN ISO 7765-1|
|Special methods for hardness testing Calibration of hardness testers for instrumented indentation tests (Martens), Vickers and Brinell depth measurement methods||DIN EN ISO 14577-2 VDI/ VDE 2616|
|Melt index (MFR)/volume flow index (MVR) Calibration of extrusion plastometers for melt index and volume flow index||Load, piston stroke and temperature||EN ISO 1133|
|Vicat/HDT Calibration of Vicat/HDT heat deflection temperature with oil bath or direct contact heating||Load, depth travel and temperature||DIN EN ISO 306 DIN EN ISO 75-1|
|Temperature device Calibration of temperature in center of test-chamber of temperature chambers||from -40°C to 350°C||According to DAkkS-DKD-R 5-7 Meth. C|
|High temperature Calibration of thermo-elements of high-temperature furnaces||Up to 1,200°C||According to DAkkS-DKD-R 5-3|
What sets us apart
The range for calibration depends on the type of load cell on the materials testing machine, the machine electronics, and the display resolution. For Zwick materials testing machines with high precision(HP) series load cells, the range is starts at 0.2% of nominal force; for other types the range starts at 0.4%. In this way we cover the full measurement range and ensure maximum result accuracy. The standards require a calibration range of 20 – 100% of the nominal load and five calibration stages. A Zwick calibration certificate consists of 11 calibration stages.
As part of our calibration service, we offer inspections carried out using checklists to reduce the risk of malfunctions or machine downtime and guarantee productivity. This means you save money on repair costs and spare parts in the long term. During these inspections, which only we as manufacturers can perform, our service technicians inspect your testing machines and are able to carry out minor repairs and adjustments on the spot. This inspection is especially important, since the normative directives DIN EN ISO 7500-1 specify the need for inspection prior to calibration.